Bring a retro toggle, rotary dimmer and duplex outlet together in a coordinated three-gang layout. The rounded toggle sits on the left, dimmer in the center and outlet on the right.
What is included
One 3-gang plate with 1 toggle switch, 1 rotary dimmer, 1 regular duplex outlet and matching mounting screws. The outlet devices are included; each duplex outlet provides two receptacles.
Finishes
Choose Brass, Aged Brass, Antique Brass, Stainless Steel / Brass, Unlacquered Aged brass, Hammered Antique Brass, Black / Brass, White / Brass. Product photography shows the plate finish and control layout; device colours follow the selections above.
These versions use brass toggle hardware, dimmer knobs where fitted, and screws across all eight plate finishes, including Stainless Steel / Brass.
Toggle certification and wiring
The toggle switch components are CE certified and are not UL listed. Certification of another component does not make the complete combination UL listed.
The toggle supports single-pole or 3-way wiring. Each lever provides on/off control for its own load.
Retro toggle rating: 15A at 110–120V.
Dimmer Specifications
The following specifications apply to the dimmer module, with load ratings stated per dimmer.
-
Dimming Type: Leading Edge (TRIAC)
-
Voltage: 110–120V | 50/60Hz
-
Load Ratings:
- Dimmable LED & halogen: 3–150 W
- Incandescent: 40–600 W
-
Built-in thermal protection: automatic safety cutoff
-
Temperature rating (Ta): up to 130°C (266°F)
-
Mechanical life: 10,000+ dimming cycles (minimum)
-
Housing: flame-retardant polycarbonate (PC)
-
Fit: fits standard North American single-gang electrical wall boxes
-
Certification: UL Certified (U.S. & Canada)
Single-Pole vs 3-Way
-
Single-Pole: Click ON/OFF while rotating the knob, then continue turning to adjust brightness. For lighting controlled from one location.
-
3-Way: Push the knob for ON/OFF, then rotate to adjust brightness. Suitable for single-pole or 3-way wiring; in a 3-way setup, switching is available from two locations.
The selected dimmer type determines the ON/OFF action. Where a plate includes more than one dimmer, the selected type applies to each dimmer.
Use TRIAC-compatible dimmable lamps or drivers and follow the instructions supplied for the exact module. For multi-gang plates, the complete wall box must match the plate’s gang count; follow any required load derating when dimmers are installed together. The single-gang fit specification above refers to an individual dimmer module.
Outlet specifications
Choose 15A or 20A regular duplex outlets using the amperage selector. All outlets on the plate use the selected rating. These versions use standard receptacle faces; USB charging and GFCI devices can be selected through the PlatePrestige configurator.
Plate size and installation
Default plate size: 4.7 × 6.3 inches.
Have a qualified electrician confirm the selected controls, circuit requirements, mounting positions and wall-box clearance before installation. Follow the instructions supplied for the exact devices. See the wiring guide and installation guide.
Explore the combination switch plates and follow our finish care guide. Review return eligibility for your chosen finish and gang size.
Prefer a textured finish? Browse Hammered Antique Brass switches, dimmers and outlets.
