Combine a knurled toggle switch with two rotary dimmers. The three-gang layout puts the toggle on the left and dimmers in the center and right positions.
What is included
One 3-gang plate with 1 toggle switch, 2 rotary dimmers and matching mounting screws.
Finishes
Choose Brass, Aged Brass, Antique Brass, Stainless Steel, Unlacquered Aged brass, Hammered Antique Brass, Black / Brass, White / Brass, All-Black, All-White. The selected photo shows the exact plate and control combination.
Antique Brass uses matching aged bronze controls and screws. Stainless Steel uses silver controls and screws. All-Black has black controls and screws; All-White has white controls, screws and device faces. The other listed finishes pair the plate with brass controls and screws. Outlet faces and toggle inserts are black except in All-White.
Toggle specifications
The knurled toggle components have rectangular inserts and are cULus listed, rated 15A at 110–120V. They support single-pole or 3-way wiring.
Dimmer specifications
Choose Single Pole or 3-Way at the same price. The selected Dimmer Type applies to every dimmer on this plate.
-
Single Pole: Rotate the knob through the click to turn the light on or off, then rotate to adjust brightness. This option controls the lighting load from one location.
-
3-Way: Push the knob to turn the light on or off, then rotate to adjust brightness. This option supports single-pole operation or 3-way wiring with a standard 3-way switch at the other location.
Both dimmer types use the same component specifications. The ratings below apply to each dimmer:
- Voltage and frequency: 110–120V, 50/60Hz.
- Dimming type: TRIAC / leading-edge.
- Dimmable LED/halogen: 3–150W nominal component range.
- Incandescent: 40–600W nominal component range.
- Dimmer component: cULus listed for the U.S. and Canada.
Use TRIAC-compatible dimmable lamps or drivers. Follow the supplied module instructions for the permitted installed load, including any multi-gang derating.
Plate size and installation
Default plate size: 4.7 × 6.3 inches.
Have a qualified electrician confirm the selected controls, circuit requirements, mounting positions and wall-box clearance before installation. Follow the instructions supplied for the exact devices. See the wiring guide and installation guide.
Explore the combination switch plates and follow our finish care guide. Review return eligibility for your chosen finish and gang size.
Prefer a textured finish? Browse Hammered Antique Brass switches, dimmers and outlets.
